We are selling this inverter as a GRID TIE UNIT as we do not have stock of the transformers needed to complete the self-consumption mode.
Designed for use with SolarEdge Power Optimizers for the most efficient grid-tie inverter solar system available. We carry the latest SE7600A-US (-U) UL1699B certified inverters with arc fault detection and interruption compliance.
- Superior efficiency at up to 98%!
- Type 1 Photovoltaic Arc-Fault Circuit-Protection
- Small, lightweight and easy to install on provided bracket
- Built-in module-level monitoring through power optimizers
- Communication to internet via Ethernet or Wireless
- Outdoor and indoor installation
- Integral AC/DC Switch
The SE7800A-US inverter is part of SolarEdge’s larger fan-cooled single-phase inverter series. These are designed to provide higher-power systems at a lower cost than multiple small convection cooled inverters.
On-grid Applications - maximizes self-consumption through export limit feature and time of use shifts for reduced electric bills
Simple Design and Installation - single inverter for PV, on-grid storage, and backup power
Enhanced Safety - designed to eliminate high voltage and current during installation, maintenance, and firefighting
Full Visibility - built-in monitoring of battery status, PV production, remaining backup power, and self-consumption data
Easy Maintenance - remote access to inverter software.
Inverter includes the hardware required for automatic backup power for backed-up loads in case of grid interruption.
Like SolarEdge inverters, they are designed to work exclusively with SolarEdge power optimizers for use with solar modules. Both the optimizer strings and battery system operate at a nominal 400 VDC. The inverter and optimizers have ground fault and arc fault protection, and automatically limit the DC voltage to 1 VDC per module, and the battery is disabled when the inverter is not connected to the grid, improving installer and firefighter safety.
When used for export control, time-of-use shifting, self-consumption, or peak shaving capabilities, the SE Electricity Meter is needed and comes with CT’s to be installed on the house AC lines. Meter can be purchased HERE!
For backup power capability, the SEAUTO-TX-5000 auto-transformer must be installed as well as a backup loads panel for the critical loads.