Please NOTE: This meter requires either the 200A or 400A current sensors which are sold separately. You can buy them by clicking here
The SolarEdge electricity meter enables measuring the power and energy of a SolarEdge photovoltaic (PV) system. The meter is used by the inverter for the following applications:
- Consumption monitoring
- Export limitation
- StorEdge Smart Energy Management on-grid applications
The meter is built into a NEMA 3R enclosure and requires two current transformers (CT). The SolarEdge inverter or the Control and Communication Gateway (CCG) reads the exported power from a meter installed at the grid connection point or reads the consumption from a meter installed at the load consumption point.
Operating voltage: 240 Volts AC nominal
Power consumption: 3.0 Watts
Communication interface: RS485
Dimensions: 8.1" x 12.4" x 4.6"
Weight: 3.9 pounds
Protection rating: NEMA 3R for outdoor locations